INSTRUMENT AND CONTROL FUNCTIONS
4-7
4
EAU12347
Handlebar switches
Left
Right (XVS1100Y)
Right (XVS1100AY)
EAU12350
Pass switch “
”
Press this switch to flash the headlight.
EAU12400
Dimmer switch “
/
”
Set this switch to “
” for the high
beam and to “
” for the low beam.
EAU12460
Turn signal switch “
/
”
To signal a right-hand turn, push this
switch to “
”. To signal a left-hand
turn, push this switch to “
”. When re-
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
EAU12500
Horn switch “
”
Press this switch to sound the horn.
EAU12660
Engine stop switch “
/
”
Set this switch to “
” before starting
the engine. Set this switch to “
” to
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
EAU12711
Start switch “
”
Push this switch to crank the engine
with the starter. See page 6-1 for start-
ing instructions prior to starting the en-
gine.
EAU12733
Hazard switch “
” (XVS1100AY)
With the key in the “ON” or “
” posi-
tion, use this switch to turn on the haz-
ard lights (simultaneous flashing of all
turn signal lights).
1. Pass switch “
”
2. Dimmer switch “
/
”
3. Horn switch “
”
4. Turn signal switch “
/
”
1. Engine stop switch “
/
”
2. Start switch “
”
1. Engine stop switch “
/
”
2. Hazard switch “
”
3. Start switch “
”
U3B823E0.book Page 7 Wednesday, November 12, 2008 2:08 PM