Yamaha 2009 V Star 1300 страница 10 Скачать руководство пользователя | Manualshive

Страница: 10 / 90

background image

2-1

2

SAFETY INFORMATION

EAU10283

Be a Responsible Owner

As the vehicle’s owner, you are respon-
sible for the safe and proper operation
of your motorcycle.
Motorcycles are single-track vehicles.
Their safe use and operation are de-
pendent upon the use of proper riding
techniques as well as the expertise of
the operator. Every operator should
know the following requirements before
riding this motorcycle.
He or she should:

●

Obtain thorough instructions from
a competent source on all aspects
of motorcycle operation.

●

Observe the warnings and mainte-
nance requirements in this Own-
er’s Manual.

●

Obtain qualified training in safe
and proper riding techniques.

●

Obtain professional technical ser-
vice as indicated in this Owner’s
Manual and/or when made neces-
sary by mechanical conditions.

Safe Riding

Perform the pre-operation checks each
time you use the vehicle to make sure it
is in safe operating condition. Failure to
inspect or maintain the vehicle properly
increases the possibility of an accident
or equipment damage. See page 5-1
for a list of pre-operation checks.

●

This motorcycle is designed to car-
ry the operator and a passenger.

●

The failure of motorists to detect
and recognize motorcycles in traf-
fic is the predominating cause of
automobile/motorcycle accidents.
Many accidents have been caused
by an automobile driver who did
not see the motorcycle. Making
yourself conspicuous appears to
be very effective in reducing the
chance of this type of accident.

Therefore:

• Wear a brightly colored jacket.
• Use extra caution when you are

approaching and passing
through intersections, since in-
tersections are the most likely
places for motorcycle accidents
to occur.

• Ride where other motorists can

see you. Avoid riding in another
motorist’s blind spot.

●

Many accidents involve inexperi-
enced operators. In fact, many op-
erators who have been involved in
accidents do not even have a cur-
rent motorcycle license.

• Make sure that you are qualified

and that you only lend your
motorcycle to other qualified op-
erators.

• Know your skills and limits.

Staying within your limits may
help you to avoid an accident.

• We recommend that you prac-

tice riding your motorcycle
where there is no traffic until you
have become thoroughly famil-
iar with the motorcycle and all of
its controls.

●

Many accidents have been caused
by error of the motorcycle opera-
tor. A typical error made by the op-
erator is veering wide on a turn

U12C22E0.book Page 1 Friday, October 17, 2008 4:39 PM

«
...
8
9
10
11
12
...
»

Содержание 2009 V Star 1300



























































































Отзывы:

Нет отзывов

Похожие инструкции для 2009 V Star 1300

Бренд: Dakota Digital Страницы: 38

Бренд: ZERO GRAVITY Страницы: 6

Бренд: Dakota Digital Страницы: 6

Turismo Veloce 800 LUSSO

Бренд: AGUSTA Страницы: 616

Бренд: Honda Страницы: 150

950 SUPER ENDURO R 2006

Бренд: KTM Страницы: 86

Бренд: B&G electronics Страницы: 3

Virago XV1100K(C)

Бренд: Yamaha Страницы: 111

Бренд: Yamaha Страницы: 101

Бренд: Shark Страницы: 76

Бренд: hepco & becker Страницы: 4

Бренд: R&G Страницы: 2

Бренд: ChatterBox Страницы: 10

Бренд: Denali Страницы: 3

Бренд: Beta Страницы: 392

Бренд: Beta Страницы: 408

Бренд: Abus Страницы: 18

Бренд: Bushtec Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды