manualshive.com logo in svg

Yamaha 2008 XV1900AX, Руководство пользователя

Поделиться
Скачать
Yamaha 2008 XV1900AX Скачать руководство пользователя страница 73

PERIODIC MAINTENANCE AND MINOR REPAIR

6-29

6

EAU40760

Replacing an auxiliary light 
bulb 

This model is equipped with two auxil-
iary lights. If an auxiliary light bulb burns
out, replace it as follows.

1. Remove the headlight unit. (See

page 6-25.)

2. Remove the auxiliary light socket

(together with the coupler) by turn-
ing the socket counterclockwise.

3. Remove the defective bulb by pull-

ing it out.

4. Insert a new bulb into the socket.
5. Install the auxiliary light socket (to-

gether with the coupler) by push-
ing it in and turning it clockwise.

6. Install the headlight unit.

EAU24350

Supporting the motorcycle 

Since this model is not equipped with a
centerstand, follow these precautions
when removing the front and rear
wheel or performing other maintenance
requiring the motorcycle to stand up-
right. Check that the motorcycle is in a
stable and level position before starting
any maintenance. A strong wooden
box can be placed under the engine for
added stability.

To service the front wheel

1. Stabilize the rear of the motorcycle

by using a motorcycle stand or, if
an additional motorcycle stand is
not available, by placing a jack un-
der the frame in front of the rear
wheel.

2. Raise the front wheel off the

ground by using a motorcycle
stand.

To service the rear wheel

Raise the rear wheel off the ground by
using a motorcycle stand or, if a motor-
cycle stand is not available, by placing

1. Auxiliary light bulb socket

1. Auxiliary light bulb

U5C522E0.book  Page 29  Wednesday, October 17, 2007  11:38 AM

Содержание 2008 XV1900AX

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды