background image

PERIODIC MAINTENANCE AND MINOR REPAIR

6-21

6

EAU22380

Checking the front brake pads 
and rear brake shoes 

The front brake pads and the rear brake
shoes must be checked for wear at the
intervals specified in the periodic main-
tenance and lubrication chart.

EAU22430

Front brake pads

Each front brake pad is provided with
wear indicator grooves, which allow
you to check the brake pad wear with-
out having to disassemble the brake.
To check the brake pad wear, check
the wear indicator grooves. If a brake
pad has worn to the point that the wear

indicator grooves have almost disap-
peared, have a Yamaha dealer replace
the brake pads as a set.

EAU22540

Rear brake shoes

The rear brake is provided with a wear
indicator, which allows you to check the
brake shoe wear without having to dis-
assemble the brake. To check the
brake shoe wear, check the position of
the wear indicator while applying the
brake. If a brake shoe has worn to the
point that the wear indicator reaches
the wear limit line, have a Yamaha
dealer replace the brake shoes as a
set.

EAU32343

Checking the front brake fluid 
level 

Insufficient brake fluid may allow air to
enter the brake system, possibly caus-
ing it to become ineffective.
Before riding, check that the brake fluid
is above the minimum level mark and
replenish if necessary. A low brake fluid
level may indicate worn brake pads
and/or brake system leakage. If the
brake fluid level is low, be sure to check
the brake pads for wear and the brake
system for leakage.
Observe these precautions:

1. Brake pad wear indicator groove

1. Brake shoe wear limit line
2. Brake shoe wear indicator

1. Minimum level mark

U3B720E0.book  Page 21  Friday, April 15, 2005  1:34 PM

Содержание 2006 V Star XVS650AV





























































































Отзывы: