background image

PERIODIC MAINTENANCE AND MINOR REPAIR

6-1

6

EAU17240

Safety is an obligation of the owner. Pe-
riodic inspection, adjustment and lubri-
cation will keep your vehicle in the
safest and most efficient condition pos-
sible. The most important points of in-
spection, adjustment, and lubrication
are explained on the following pages.
The intervals given in the periodic
maintenance and lubrication chart
should be simply considered as a gen-
eral guide under normal riding condi-
tions. However, DEPENDING ON THE
WEATHER, TERRAIN, GEOGRAPHI-
CAL LOCATION, AND INDIVIDUAL
USE, THE MAINTENANCE INTER-
VALS MAY NEED TO BE SHORT-
ENED.

WARNING

EWA10320

If you are not familiar with mainte-
nance work, have a Yamaha dealer
do it for you.

EAU17450

Owner’s tool kit 

The owner’s tool kit is located inside the
storage compartment. (See page
3-15.)
The service information included in this
manual and the tools provided in the
owner’s tool kit are intended to assist
you in the performance of preventive
maintenance and minor repairs. How-
ever, additional tools such as a torque
wrench may be necessary to perform
certain maintenance work correctly.

NOTE:

If you do not have the tools or experi-
ence required for a particular job, have
a Yamaha dealer perform it for you.

WARNING

EWA10350

Modifications not approved by
Yamaha may cause loss of perfor-
mance and render the vehicle un-
safe for use. Consult a Yamaha
dealer before attempting any chang-
es.

1. Owner’s tool kit

5YS20.book  Page 1  Thursday, June 19, 2003  1:41 PM

Содержание 2004 XVS1100AS































































































Отзывы: