manualshive.com logo in svg

Yamaha 2000 V Star XVS650AM, Руководство пользователя, Страница: 76 / 105

Поделиться
Скачать
Yamaha 2000 V Star XVS650AM Скачать руководство пользователя страница 76

PERIODIC MAINTENANCE AND MINOR REPAIR

6-26

6

EW000116

WARNING

@ 

Battery electrolyte is poisonous and
dangerous, causing severe burns,
etc. It contains sulfuric acid. Avoid
contact with skin, eyes or clothing.
ANTIDOTE:

●

EXTERNAL: Flush with water.

●

INTERNAL: Drink large quanti-
ties of water or milk. Follow with
milk of magnesia, beaten egg,
or vegetable oil. Call a physi-
cian immediately.

●

EYES: Flush with water for
15 minutes and get prompt
medical attention.

Batteries produce explosive gases.
Keep sparks, flame, cigarettes etc.,
away. Ventilate when charging or
using in an enclosed space. Always
shield your eyes when working near
batteries.
KEEP OUT OF REACH OF CHIL-
DREN. 

@

Battery storage
When the motorcycle is not used for a
month or longer, remove the battery,
fully charge it and store it in a cool, dry
place.

EC000102

CAUTION:

@ 

●

Completely recharge the bat-
tery before storing. Storing a
discharged battery can cause
permanent battery damage.

●

Use a battery charger designed
for a sealed-type (MF) battery.
Using a conventional battery
charger will cause battery dam-
age. If you do not have a sealed-
type battery charger, contact
your Yamaha dealer.

●

Always make sure the connec-
tions are correct when reinstall-
ing the battery. 

@

E_4xs_Periodic.fm  Page 26  Tuesday, November 30, 1999  2:36 PM

Содержание 2000 V Star XVS650AM










































































































Отзывы:

Нет отзывов