Yamaha 2.0, Руководство пользователя

Страница: 126 / 174

122
Feature Reference — Utility Mode
29 SEQ (sequencer)
The SEQ sub-mode contains the settings related
to the CLICK and synchronization. Select the
parameters between this page and the 40th page
using the PAGE
¡ or PAGE ⁄ buttons. This
function is mainly used to synchronize the
metronome or external MIDI device.
A
Move from this page to other sub-modes by rotating the
Data Scroll Wheel or using the +1/YES and -1/NO buttons.
MISC.
SNARE
KICK
CYMBAL
UTILITY
[ SEQ ]
30 Click Hi
This function sets the sound of the accent click
(the click at the beginning of each measure) of
the metronome.
Rotate the Data Scroll Wheel or use the +1/YES
and -1/NO buttons to select the note number of
the sound you want to use. Check the sound
by pressing the CLICK button to play the
metronome.
MISC.
SNARE
KICK
CYMBAL
Click Hi
Note= 22
Settings:
Note number: 0-127
A
Note that the sounds used for the CLICK (hi, mid, low)
may differ depending on the currently selected drum kit since
the voices assigned to the MIDI note numbers are different.
Refer to the drum kit list (P.148) for the voice assignment of
each note number.
31 Click Mid
This function sets the sound of the normal click
(the click of each quarter note) of the
metronome.
Rotate the Data Scroll Wheel or use the +1/YES
and -1/NO buttons to select the note number of
the sound you want to use. Check the sound
by pressing the CLICK button to play the
metronome.
MISC.
SNARE
KICK
CYMBAL
ClickMid
Note= 24
Settings:
Note number: 0-127
32 Click Lo
This function sets the sound of other clicks (the
clicks set to notes of finer quantization) of the
metronome.
Rotate the Data Scroll Wheel or use the +1/YES
and -1/NO buttons to select the note number of
the sound you want to use. Check the sound
by pressing the CLICK button to play the
metronome.
MISC.
SNARE
KICK
CYMBAL
Click Lo
Note= 23
Settings:
Note number: 0-127