Instrument operation
47
Mode” flashes in the LCD, the no-wake
mode is activated.
1
Plus side “
”
TIP:
The no-wake mode can be set to 3 engine
speeds. To adjust the engine speed while the
no-wake mode is activated, push the plus side
or minus side of the no-wake mode/cruise as-
sist switch.
To deactivate the no-wake mode:
Perform one of the following operations.
●
Push the minus side of the no-wake
mode/cruise assist switch until the LCD re-
turns to the normal display.
1
Minus side “
”
●
Push the remote control lever forward to
open the throttle.
Cruise assist
The cruise assist feature is for steady engine
speed operation when the boat is traveling
above no-wake speeds. The cruise assist is
available for use whenever the engine is run-
ning above 3000 rpm and below 7000 rpm.
To activate the cruise assist:
(1) Push the remote control lever forward to
open the throttle until the desired engine
speed is reached.
(2) Push the plus side or minus side of the
no-wake mode/cruise assist switch.
1
No Wake
Mode
1
SportsBoat_F3M11.book Page 47 Wednesday, June 1, 2016 3:42 PM
