Editware Technical Note
Page 4 of 7
09/24/2002
Fastrack VS and the Yamaha 03D Audio Mixer
MONITORING
The 03D has a monitoring bus that can be remotely controlled as a preview bus; therefore, all audio
previews should be done utilizing this preview switcher in the 03D.
Set each source's BUS Out and monitoring in the
[PAN/ROUTE]
section as below for four channels
per source:
The BUS Outputs (1-4) are fed to the RECORD device for recording (or AES Out if the YGADI
option is installed) and the MONITOR OUT connected to amplifier and speakers. The ST OUT is the
signal that is monitored on the MONITOR OUT (when set in
[Bus to ST]
to OFF {not highlighted}),
allowing preview monitoring to be controlled via the 03D mixer. The MONITOR OUT has a volume
control knob for convenient speaker volume adjustment.