manualshive.com logo in svg

Yamaha 02R, Руководство пользователя

Поделиться
Скачать
Yamaha 02R Скачать руководство пользователя страница 85

76

Mixing and Automation

Digital Recording Console 02R Getting Started Guide

Editing Automation Events

Overwriting Events

You can overwrite the events that have been recorded into the current 
automix. You can alter events on an already recorded channel or you can 
record new events onto another channel. For example, you may first record 
the faders for the rhythm section to the automix and then overwrite the 
fader operations for the lead parts and vocals.

1.

If required, press the [AUTOMIX] button repeatedly to get to the 
“Main” screen.

You can stop when the “Automix Main” screen reappears:

2.

Use the CURSOR buttons to select the desired “Overwrite” items 
and press the [ENTER] button.

3.

Select the “RECORD” icon with the CURSOR buttons and press the 
[ENTER] button.

The “RECORD” icon will flash.

4.

Press the [SEL] buttons for the tape return channels you want to 
overwrite.

It is very important that you be careful when you select the type of events 
and channels that will be overwritten. If you select the same channel and 
the same type of event as the last session, the previously recorded events 
will be deleted the moment the automix recording begins.

Note:

If you double-click the [ENTER] button on a selected “Overwrite” item, 

only that item will be selected and the other items will be switched off.

AUTOMIX

WARNING!

Be careful 

that previously recorded 
events are not accidentally 
overwritten when you 
make these selections.

Содержание 02R



































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды