manualshive.com logo in svg

Yamaha 02R, Руководство пользователя

Поделиться
Скачать
Yamaha 02R Скачать руководство пользователя страница 317

206

Specifications

Digital Recording Console 02R User’s Guide

Specifications

MIDI Data Format

1. General remarks

1-1

This section describes the MIDI functionality of the 02R.

1-2

Electrical characteristics and message formats are in compliance with MIDI standard 1.0.

2. Messages transmitted and received

2-1. Program change

Transmission/reception can be turned ON or OFF using the “MIDI Setup” display function (see “Setup” on 
page 143 of the 

User’s Guide

).

When a memory recall occurs, the program change corresponding to that memory number will be 
transmitted on the specified MIDI channel.

When a program change is received on the specified MIDI channel or in OMNI mode, the memory 
corresponding to that program number will be recalled.

The user can create a customized program change assign table (see “Program Change Assign” on page 144 of 
the 

User’s Guide

).

2-2. System exclusive messages

System exclusive messages include Bulk Dump/Request and Parameter Change/Request. For these 
messages, the device number will be the same as the MIDI channel.

BULK DUMP/REQUEST

Transmission and reception is always ON.

Bulk Request is transmitted using the “MIDI Bulk Dump & Request” display function (see “Bulk 
Dump/Request” on page 145 of the 

User’s Guide

) on the specified MIDI channel.

Bulk Dump transmits the contents of the corresponding memory on the specified MIDI channel, and is 
transmitted either by operations in the “MIDI Bulk Dump & Request” display function, or when a Bulk 
Request is received on the specified MIDI channel.

When a Bulk Dump is received, the contents of the corresponding memory will change.

PARAMETER CHANGE/REQUEST

Transmission/reception can be turned ON or OFF using the “MIDI Setup” display function (see “Setup” on 
page 143 of the 

User’s Guide

).

If parameter change transmission is ON, a message will be transmitted on the specified MIDI channel when 
the parameters of the 02R are modified.

Содержание 02R



































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды