Yamaha 02R, Руководство пользователя

Страница: 151 / 354

MIXING Display Functions 41
Digital Recording Console 02R User’s Guide
Metering
The Digital Recording Console 02R features comprehensive signal level
metering. The mono and stereo input channels, the tape and effect returns,
and the auxiliary sends and buses are all metered using the METER display
function. The control room output is metered using the dedicated
21-segment LED meters. Peak hold is available for all meters.
Display Screens
The METER display function consists of three screens. The first screen
shows the input channels – MIC/LINE 1 through 16 and LINE 17/18
through 23/24:
Select this screen by pressing a [SEL] button for one of the MIC/LINE
channels.
The second screen shows the tape and effect returns – TAPE 1 through 16
and EFF1 and EFF2:
Select this screen by pressing a [SEL] button for the tape or effect returns
channels. You can also select this screen by pressing the [METER] button
until it appears in sequence.
1. Press the [METER] button.
The METER display
function appears.
To select the first screen,
press the [METER] button.
Subsequent presses of
the [METER] button select
the next two screens in
sequence.
2. Select a channel using
the [SEL] buttons or the
CURSOR buttons.
3. Use the CURSOR buttons
to select the PEAK HOLD
icon and press the
[ENTER] button to switch
the function on or off.
4. Select one of the meter
source point icons –
PRE EQ, POST EQ, or
POST FADER – with the
CURSOR buttons. Make it
the current meter point
by pressing the [ENTER]
button.
METER