Yamaha 02R, Руководство пользователя

Страница: 144 / 354

34 MIXING Display Functions
Digital Recording Console 02R User’s Guide
Delay
The DELAY display function is used to apply a small amount of delay to
input or return signals to compensate for situations such as line or cabling
delays or the gap between the record and playback heads (or circuitry) of
your multitrack recorder. You can delay a signal from 0 to 2,600 samples –
at 44.1 kHz this is a delay of 0 to 59.0 ms and at 48 kHz it is a delay of 0 to
54.2 ms.
Delay can be applied to any of the input channels and the tape and effect
return channels. The stereo input channels are always ganged together. The
MIC/LINE and TAPE channels are set independently only when they are
not linked together in GANG mode with the PAN function
Delay and Cascade
If you use a digital cascade kit (CD8-CS) to connect more than four 02Rs
together, you will need to use the DELAY display function to apply delay
to the machines closest to the output. Set a delay value of 10 to 20 samples
for each unit.
The digital cascade kit will automatically apply the correct amount of delay
when you connect four or less 02Rs together. See “Cascade Configuration”
on page 157 of the
User’s Guide .
Display Screens
The following illustration shows the first screen of the DELAY display
function. It shows the MIC/LINE 1 through 16 and LINE 17/18 through
23/24:
Select this screen by pressing a [SEL] button for one of the MIC/LINE
channels.
1. Press the [DELAY] button.
The DELAY display
function appears.
2. Select a channel using
the [SEL] buttons or the
CURSOR buttons.
3. By default, the delay is
off. Press the [ENTER]
button to turn it on. The
OFF icon, highlighted in
reverse video, changes
to ON.
4. Use the CURSOR buttons
to select either [Smpl] or
[mSEC].
5. To change the delay,
rotate the encoder
wheel until the desired
value is shown.
Rotate the encoder
clockwise to increase
the delay amount and
counter-clockwise to
decrease the delay
amount.
Note: Double-click the
[ENTER] button to set the
delay for all channels to the
same value as the selected
channel.
DELAY