23
01V96 Editor—Owner’s Manual
Patch Editor Window
The Patch Editor window is used to patch Inputs, Outputs, Inserts, Effects, and Direct Outs. To open
this window, choose [Patch Editor] from the [Windows] menu. This window consists of five pages,
which you can select by clicking the tabs along the top of the window.
❏
INPUT PATCH Page
A
Channel IDs
These are the Channel IDs.
B
Long channel names
These are the Channel long names. To edit a name, click it and type.
C
[AUTO SETUP] button
Clicking this button sets the patches on this page to their initial values.
D
[ALL CLEAR] button
This button clears all patches on this page.
E
[LIBRARY] button
This button opens the Input Patch Library window.
F
Port names
These are the Port names.
G
Patchbay
The patchbay is used to patch input ports to Input Channels. Active patches are indicated by a blue
dot. To make a patch, click a square. To unpatch, click a blue dot.
Note:
You can also use the cursor keys and the <ENTER> key on the computer keyboard to make a patch.
Note:
Input sources (AD1–AUX8) that are assigned to a cascade connection (CAS BUS1–CASSOLOR)
cannot be assigned to non-cascade-connected channels (CH1–32).
B
A
C
D
E
G
F
