3/16"
#7
1/4-20
Pinion Cap
Closer
Size
Stamp
"L"Valve
"S"Valve
Standard Components
Optional Components
Closer Body
Sleeve Nut and Bolt
Thru Bolt and Grommet Nut
Drill 9/32 thru from Closer Side
3/8 Drill other side
Drill 9/32 thru from Closer Side
3/8 Drill other Side
(Optional)
Metal
Wood
Top Jamb
Installation
See Page 5
CA
UTION
CA
UTION
An Incorrectly installed or improperly adjusted
door closer can cause property damage or
personal injury. These installation instructions
should be followed to avoid the possibility of
misapplication or misadjustment.
2388
Plate
NOTE:
For special applications a separate
door and frame preparation template is
packed with these instructions. Use this
instruction sheet for installation sequence
and closer adjustments only.
Doors should be hung on ball bearing or
anti-friction hinges.
A separate door stop is recommended.
Door and frame must be properly
reinforced.
Adjust closing time speed between 3 and 7
seconds from 90° to 0°.
These door closers should NOT be
installed on the exposed side (weather
side) of exterior doors.
Right Hand Door - RH
Left Hand Reverse - LHR
Right Hand Door - RH
Left Hand Reverse - LHR
Regular Arm
Installation
See Page 2
Left Hand Door - LH
Right Hand Reverse - RHR
Left Hand Door - LH
Right Hand Reverse - RHR
Top Jamb
Installation
See Page 5
Regular Arm
Installation
See Page 2
Parallel Arm
Installation
See Pages
3 & 4
Parallel Arm
Installation
See Pages
3 & 4
4
2588 Soffit Plate
Used with Parallel
Arm Closers Only
Soffit Adapter Plate
Main Arm
Set
Screw
Arm
Assembly
Installation Instructions
80-9323-0012-010 (01-09)
Hold Open Arm Models
Non Handed Door Closer
Regular Arm
Top Jamb
Parallel Arm
2310BC
Series
Sized
(Sizes 2,3,4,5)
2312BC
2313BC
2314BC
2315BC
Weaker
-
Stronger
+
Machine Screws
#7 Drill, 1/4-20 Tap
Self Drilling Screws
Wood and Metal
For Wood drill 3/16 hole
Right
Left
Hand Door - RH
Hand Reverse - LHR
Left
Right
Hand Door - LH
Hand Reverse - RHR
