Yaesu WIRES-X TM-400XDE, Инструкция по эксплуатации

Страница: 21 / 66

20
Basic Operation
Refer to “ Using the Portable Digital Node Mode ” or “ Using the Portable HRI Mode ” (page 49) according to the
mode to be used.
Using the Portable Digital Node Mode
Connecting the transceiver and the PC
Refer to “
Communicating only with C4FM digital mode (Portable Digital Node Mode)
” (page 12) and connect
the transceiver to the PC.
Starting the WIRES-X software
1. Double click the [ Wires-X ] icon on the desktop of the computer screen.
The main screen of WIRES-X software is displayed.
For details on the main screen, refer to “ WIRES-X Software Main Screen ” (page 54).
Starting the transceiver in special mode

FT5DR/DE
1. Press and hold the [ GM/X ] key, [ BAND ] key and the POWER switch to turn the transceiver ON .
“ WIRES-X PDN ” is displayed on the LCD screen.
2. Press the [
A/B
] key to select “
Access Point
” or “
Direct Operation
”.
Depending on the operation mode chosen, the frequency display will show as follows:
Access Point: “ （ Frequency display ） ”
Direct Operation: “DIRECT”

FT3DR/DE
1. Press and hold the [ X ] key, [ BAND ] key and the POWER switch to turn the transceiver ON .
“ WIRES-X PDN ” is displayed on the LCD screen.
2. Press the [ A/B ] key to select “ Access Point ” or “ Direct Operation ”.
Depending on the operation mode chosen, the frequency display will show as follows:
Access Point: “ （ Frequency display ） ”
Direct Operation: “DIRECT”

FT2DR/DE
1. Press and hold the [ X ] key, [ BAND ] key and the POWER switch to turn the transceiver ON .
“ PDN ” is displayed on the LCD screen.
2. Press the [ A/B ] key to select “ Access Point ” or “ Direct Operation ”.
Depending on the operation mode chosen, the frequency display will show as follows:
Access Point: “
（
Frequency display
）
”
Direct Operation: “DIRECT”

FTM-400XDR/XDE or FTM-400DR/DE
1. Press and hold the [ D X ] key and the POWER switch to turn the transceiver ON .
“
PDN
” is displayed on the LCD screen.
2. Press the B-Band DIAL knob (Lower) to select “ Access Point ” or “ Direct Operation ”.
Depending on the operation mode chosen, the A band frequency display will show as follows:
Access Point: “
（
Frequency display
）
”
Direct Operation: “DIRECT”

FTM-300DR/DE or FTM-200DR/DE
1. Press and hold the [ D X ] key and the POWER switch to turn the transceiver ON .
“
WIRES-X PDN
” is displayed on the LCD screen.
2. Press the [ A/B ] key to select “ Access Point ” or “ Direct Operation ”.
Depending on the operation mode chosen, the display will show as follows:
Access Point: “
（
Frequency display
）
”
Direct Operation: “DIRECT”