Yaesu VX-8DE Скачать руководство пользователя страница 24

Страница: 24 / 180

VX-8DR/DE O

PERATING

ANUAL

AND

FM B

ROADCAST

ECEPTION

The

VX-8DR/DE

includes provision for reception of AM and FM broadcasts. FM broad-

cast reception, utilizes a wide-bandwidth filter and stereo decoder which provides excel-
lent fidelity.

The AM and FM Broadcast reception is only possible on “VFO-A”.

Press the

key briefly to engage the “VFO-A” as the “Operating” band.

Press the

key, then press the

key to enter the Broadcast Reception mode. The

“

” icon will appear on the display while in the Broadcast Reception mode.

Press the

key to toggle the receiver between the “AM broadcast” and “FM broad-

cast” bands.
The AM broadcast coverage is 510 to 1790 kHz (USA/EXP
versions) or 504 to 179 kHz (EU version). The Band Num-
ber changes to “

” (which means AM) and an Operating

Mode icon changes to “AM”.
The FM broadcast coverage is 76.00 to 107.90 MHz (USA/
EXP versions) or 88.00 to 107.90 MHz (EU version) and
utilizes Wide-FM mode. The Band Number changes to “

”

(which means FM) and an Operating Mode icon changes to
“WFM”.

Rotate the

DIAL

knob to select the desired station. When receiving an FM stereo

signal, “

” icon will appear on the display.

To exit to normal operation, press the

key followed by the

key.

PERATION

Содержание VX-8DE





















































































































































































Результаты поиска

Содержание VX-8DE

Отзывы:

Yaesu VX-8DE, Руководство по эксплуатации, Страница: 24 / 180

Результаты поиска

Содержание VX-8DE

Отзывы: