manualshive.com logo in svg

Yaesu VX-8DE, Руководство по эксплуатации, Страница: 178 / 180

Поделиться
Скачать
Yaesu VX-8DE Скачать руководство пользователя страница 178

VX-8DR/DE O

PERATING

 M

ANUAL

176

FCC N

OTICE

1. Changes or modifications to this device not expressly approved by YAESU

MUSEN could void the user’s authorization to operate this device.

2. This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions; (1) this device may not cause harmful interference, and
(2) this device must accept any interference including interference that may cause
undesired operation.

3. The scanning receiver in this equipment is incapable of tuning, or readily being

altered, by the User to operate within the frequency bands allocated to the
Domestic public Cellular Telecommunications Service in Part 22.

WARNING

: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR

RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES
AND FEDERAL LAW.

DECLARATION BY MANUFACTURER

The Scanner receiver is not a digital scanner and is incapable of being converted or
modified to a digital scanner receiver by any user.

Содержание VX-8DE





















































































































































































Отзывы:

Нет отзывов