Yaesu VX-8DE Скачать руководство пользователя страница 100 | Manualshive

Страница: 100 / 180

Yaesu VX-8DE Скачать руководство пользователя страница 100

VX-8DR/DE O

PERATING

M

ANUAL

98

C

HANNEL

C

OUNTER

O

PERATION

The Channel Counter allows measuring of the frequency of a nearby transmitter, without
knowing that frequency in advance. The frequency can be measured by bringing the

VX-

8DR/DE

close to the transceiver which is transmitting.

The

VX-8DR/DE

performs a high-speed search within a ±5 MHz range from the fre-

quency displayed on the LCD. When the strongest signal in that range is identified, the

VX-8DR/DE

displays the frequency of that (strongest) signal, and writes it into the spe-

cial “Channel Counter” memory.

Note

: This Channel Counter is designed to provide an

indication

of the operating fre-

quency of the incoming signal, one that is close enough to allow the user to tune precisely
to the other station’s frequency. This feature is not, however, designed to provide a precise
determination of the other station’s frequency.

The Channel Counter feature can only be activated while the

VX-8DR/DE

is

operating in the “A-Band”.

1.

Set the “A-Band” to the VFO mode in the predicted frequency range for the transmit-
ter to be measured, then set the “A-Band” to the “Operating” band (indicated in

large

characters).

2.

Bring the

VX-8DR/DE

into close proximity to the transmitter to be measured.

3.

Rotate the

DIAL

knob, while pressing and holding in the

key, to select the “

CH COUNTER

” mode.

4.

Release the

key to begin the Channel Counter; the fre-

quency of the nearby station will be displayed. When the
channel counter is active, a 50 dB receiver front-end at-
tenuator will be engaged. Therefore, only stations in close
proximity may have their frequencies measured using this
feature.

5.

If it isn’t possible to determine the signal’s frequency, the
“

- - - NO - - -

” notation appears for two seconds, then the

transceiver will return to the frequency on which you were
operating when you started Channel Counter operation.

6.

When you are finished, press the

key. The radio will exit from Channel Counter

operation.

«
...
98
99
100
101
102
...
»

Содержание VX-8DE





















































































































































































Отзывы:

Нет отзывов