background image

5

System Requirements (Operating Environment)

 

z

Supported Transceivers

FTDX101MP, FTDX101D  (As of April 2020)

 

z

The latest Transceiver Firmware

Update to the latest software and firmware on the YAESU website (https://www.yaesu.com).

•   FTDX101MP/D

 

MAIN: 

V01-14 or later

 

DISPLAY:  V01-06 or later

 

IF DSP:  V01-05 or later

 SDR: 

V02-03 or later

 

z

PC

•  OS

 Microsoft

®

 Windows

®

 10(32 bit/64 bit)

 Microsoft

®

 Windows

®

 8.1(32 bit/64 bit)

  

 

S mode is not supported, application runs in 32bit mode

•  CPU

 Intel

®

 i5-3470, i7-3770 or higher, or equivalent or higher performance

 

(CPU clock 3.2GHz, quad core or above)

•  RAM

 (System memory)

 

4GB or more

•  HDD

 (Hard Disk)

10GB or more free space recommended

•  LAN port

  100BASE-TX/1000BASE-T

•  Audio interfaces
•  Speaker

 or 

Headphone

•  Microphone
•  Microsoft .NET Framework 4 or higher is installed (enabled)

When using a USB Audio type microphone or speaker, the performance of the PC including the OS will be affected. There

-

fore, the sound may be interrupted, or the remote control may be delayed.

 

z

LAN

 

z

Internet connection

  (Download speed: at least 2 Mbps, Upload speed: at least 1.2 M bps are recommend-

ed at the PC Side)

  Communication is possible with the following 4 ports among UDP (user datagram protocol) ports.

 50000

 - 

50003

 (Factory setting)

 

 Address conversion function (NAPT, IP masquerade) is required when using a router.

 

z

If your router or computer has a firewall function, you need to allow communication to the above ports.

 

z

If the Internet line is also used for other purposes, audio may be interrupted, or remote control may become unstable.

 

z

Fixed global IP address

 or 

fixed domain name

 (for remote control using Internet line)

  When using the Internet, a fixed global IP address or fixed domain name is required for the network where 

the remote controlled radio is installed.

 

z

Ethernet cable

  Commercially available straight ethernet cable (category 5e or higher)

Содержание SCU-LAN10










































Отзывы: