9
Controls & Connections
M-1 Operating Manual
Playback
(
While not transmitting
)
1. The recording is played when the [ ] or [ ] key is pressed.
r
The recording can be heard over the headphones connected to the PHONES
terminal on the rear panel.
r
The volume can be adjusted with the MONITOR VOL knob.
r
During playback, the [ ] or [ ] LED lights up blue.
r
The recording can be transmitted by pressing the [ ] or [ ] key during
transmission.
2. Press the [ ] or [ ] key to stop playback.
Playback
(
Automatically Transmit the Recorded Message
)
1. Turn the Microphone OFF.
NOTE:
when the M-1 POWER switch is set to “AUTO”, The M-1 power will turn
ON/OFF in conjunction with the power switch on the transceiver.
2. Press and hold in the [ ] key while turning the Microphone ON.
r
Once the Microphone comes on, release the key. A long beep will sound.
3. The recording will be played and transmitted when the [ ] or [ ] key is
pressed.
r
The recording can also be heard over the headphones connected to the
PHONES terminal on the rear panel.
r
The volume can be adjusted with the MONITOR VOL knob.
r
During playback, the [ ] or [ ] LED lights up blue.
4. When the playback transmission ends, the transceiver will return to the
receive mode.
r
During the playback transmission, press the [ ] or [ ] key to stop the play-
back.
To cancel the “Automatic Recorded Message Transmit” operation, repeat
steps 1 and 2 above.
r
Once the Microphone comes on, release the key. A short beep will sound.
LC (Low Cut)
key
When this key is pressed, a low-cut filter (cut-off frequency 200Hz, -6dB/
octave) is activated. This low-cut filter is independent of the equalizer.
THR (THRU)
key
When this key is pressed, the graphic equalizer function is bypassed and
the the microphone element audio is output directly without being altered.
r
In the through mode, the [
THR
] button lights white, the [
1
] and [
2
] buttons are not lit.
Содержание M-1
Страница 1: ......