Yaesu FTM-500DR, Инструкция по эксплуатации

Страница: 26 / 32

26
5. Press the SUB DIAL knob, then rotate the SUB DIAL knob to select [ EDIT ], then
press the SUB DIAL knob.
6. Use the FUNC knob to enter a message of up to 80 characters.
7. Press and hold the FUNC knob.
Displays the entered message confirmation screen.
8. Press the SUB DIAL knob, then rotate the SUB DIAL knob knob to select [ UPLOAD ],
then press the SUB DIAL knob.
• Starts message transmission.
• To save the entered message as a standard message, rotate the FUNC knob to
select [ SAVE ], then press the FUNC knob (page 27).
• After message transmission completes, the screen returns to the data list.
On the character input screen, rotate the FUNC knob to select [ MTXT ], then press the
FUNC
knob to select one of the 19 routine messages.
QRM QSY Good night Pick me up
QRP Good morning Send messages Thank you
QRT Good job Send pictures OK
QRX Good day on my way urgent
QRZ Good evening wait for you
Transmitting saved messages or images to local nodes
1. Follow steps 1 to 2 in “Creating and transmitting messages to local nodes” on page
25 to display the data type select screen.
2. Rotate the FUNC knob to select [ MESSAGE ] or [ PICT ], then press the FUNC knob.
Displays the data list.
3. Rotate the FUNC knob to select the message or image to transmit, then press the
FUNC knob.
4. Press the
SUB DIAL
key, then rotate the
SUB DIAL
knob to select [
UPLOAD
], then
press the
SUB DIAL
knob.
After data transmission completes, “Completed” appears and then the screen returns
to the data type select screen.
Creating and transmitting messages to nodes or rooms on the Internet
1. Rotate the FUNC knob to select the node or room on the Internet to connect to, then
press the FUNC knob.
Displays the menu list of the node or room on the Internet.
2. Rotate the FUNC knob to select [ NEWS STATION ], then press the FUNC knob.
Displays the upload (transmission)/download (reception) select screen.
3. Rotate the FUNC knob to select [ UPLOAD ], then press the FUNC knob.
Displays the data type select screen.
4. Follow steps 3 to 8 in “Creating and transmitting messages to local nodes” on page
25 to create and transmit a message.