Yaesu FTM-500DR, Руководство для продвинутых пользователей

Страница: 50 / 74

50
18 AUDIO EQUALIZER
Set up the AESS dual speaker system that uses both the front speakers and the main
unit speakers.
1. Press and hold the
FUNC knob

[ 18 AUDIO EQUALIZER ]

Press the FUNC knob
2. Press the FUNC knob.
3. Rottate the FUNC knob to set the sound quality of the front speaker.
OFF
Standard sound quality without AESS.
FLAT Use AESS without changing sound quality.
HIGH PITCH Emphasizes high frequencies.
LOW PITCH Emphasizes low frequencies
BPF Attenuates high and low frequencies
4. Press the FUNC knob.
5. Similarly, rotate the FUNC knob to select each item of “REAR TONE”, “REAR OUT”
and “AESS PHASE”, then press the FUNC knob.
PRONT TONE
OFF Standard sound quality without AESS.
(When set to OFF, only “REAR OUT” cannot be set.)
FLAT Use AESS without changing sound quality.
HIGH PITCH Emphasizes high frequencies.
LOW PITCH Emphasizes low frequencies
BPF Attenuates high and low frequencies
REAR TONE
FLAT Use AESS without changing sound quality.
HIGH PITCH Emphasizes high frequencies.
LOW PITCH Emphasizes low frequencies
BPF Attenuates high and low frequencies
1kHz Cuts high frequencies above 1kHz
700Hz Cuts high frequencies above 700Hz
REAR OUT
0% - 100% Output level of the main body speaker.
AESS PHASE
OFF Use AESS without changing the time delay.
1.25ms - 20.00ms Sets the time delay between the audio output of the control head
speaker and the main unit speaker..