Yaesu FTM-400XDR/DE, Руководство по эксплуатации

Страница: 93 / 220

93
Using the GPS Function
Positioning Using GPS
Recording the position information (GPS log function)
The position information of your own station can be recorded (saved) in a micro-SD card
on a regular basis.
1
Press for one second or longer
The set-up menu will be displayed.
2
Touch [CONFIG]
The menu list will be displayed.
$#%- $#%-
6:4:
5'672/'07
4'5'6
%.10'
%10(+) 9 Ჰ 4'5
5%#0
&+52.#;
5+)0#.+0)
#245 126+1 0 5&%#4&
/'/14;
&#6#
%#..5+)0
3
Select [18 GPS LOG] and touch the screen
The screen for selecting the recording interval and
switching the GPS log function ON and OFF will be
displayed.
$#%- $#%-
+06'40 . #
1 ((
Ჹ Ჿ
Ჹ ᳀
)25&'8+%'
)25.1)
4
Touch
[ON]
The interval timing will be displayed in green
characters.
Tips • The position information will not be recorded when
“OFF” is selected.
• Factory default value: OFF
$#%-
$#%-
UGE
%10(+)
)25.1) ᳀ Ჹ
10 1((
Ჸ Ჹ
5
Touch [+] and [-] to select the interval timing
Each time the screen is touched, the interval timing will change in the following
sequence. The interval timing can be selected from the following six levels.
“1 sec” “2 sec” “5 sec” “10 sec” “30 sec” “60 sec”
Tip Factory default value: 10 sec
6
Press for one second or longer
The interval timing for recording the position information will be set and the display will
return to the previous screen.
The recording of the position information at the set interval will also be started.
Tips
• The position information will continue to be recorded until the power to the radio is switched off or
when “OFF” is selected in Step 4.
Recording will be restarted under the same file name when the power to the radio is turned on again,
or when the recording interval is selected one more time in Step 5.
• The position data will be saved under the filename “GPSyymmdd.log”.
“yymmdd” shows the record start time in “yy” (year), “mm” (month) and “dd” (day) format.