Yaesu FTM-400XDR/DE, Руководство по эксплуатации

Страница: 83 / 220

83
Scanning
Signal Search
Scanning the programmable memories (PMS)
Using the dedicated memory channel, only the frequencies within the specified
frequency range will be scanned.
The frequency range is registered beforehand in the PMS memory channel.
Writing into the programmable memory
Nine pairs (P1L/P1U through P9L/P9U) of frequency ranges can be set up in the PMS
memory channels.
Register the lower limit of the frequency range to be scanned into the memory channel
“P

L” and the upper limit into the memory channel “P

U”.
Memories with the same channel number “

” (a number from 1 to 9) are handled as
one pair of PMS channel “P

”.
Example: Set up a PMS channel by registering a lower frequency of 433.200 MHz
and an upper frequency of 433.700 MHz in the P1 memory channel
1
Switch to the VFO mode
2
Select the frequency (433.200) to be set for the lower
limit, using
Caution The frequency to be set as the lower limit (P1L)
must be lower than the upper limit (P1U).
3
Press for one second or longer
The memory writing screen will be displayed.
Ჸ Ჸ
᲼ ᲻ ᲻ Ჺ Ჸ Ჸ
8 ( 1
/ 76' 5%12' / 8 5 3 .
8 ( 1
Ჹ ᲼ Ჽ Ჾ
4
Turn to select
[P1L]
The memory channel can also be selected by
touching it directly.
Tip The memory channel can be assigned with an alpha-tag
name ( P.70).
Ჸ
᲻ ᲼ Ჺ ᲻ Ჸ Ჸ
Ჽ Ჸ
7 2 Ჹ
. 2 Ჹ
$#%- $#%-
5-+25'.
1 ((
& ' . & ' .
5
Press
The display will return to the previous screen, and the memorized frequency and
memory channel number will be displayed.
6
Switch to the VFO mode
7
Select the frequency (433.700) to be set for the
upper limit, using
8
Press for one second or longer
The memory writing screen will be displayed.
/ 76' 5%12' / 8 5 3 .
Ჸ Ჸ
᲼ ᲻ ᲻ Ჿ Ჸ Ჸ
8 ( 1
8 ( 1
Ჹ ᲼ Ჽ Ჾ
9
Turn to select [P1U]
The memory channel can also be selected by
touching it directly.
Tip The memory channel can be assigned with an alpha-tag
name ( P.70).
Ჸ
᲻ ᲼ Ჿ ᲻ Ჸ Ჸ
᲻ ᲼ Ჺ ᲻ Ჸ Ჸ
Ჽ Ჸ
7 2 Ჹ
. 2 Ჹ
$#%-
$#%-
5-+25'.
1 ((
& ' . & ' .