Yaesu FTM-400XDR/DE, Руководство по эксплуатации

Страница: 80 / 220

80
Scanning
Signal Search
2
Select the memory channel to be specified by turning
Tip The memory channel may also be selected by touching it
on the screen.
3
Touch [SKIP/SEL] to display “SELECT”
The setting displayed under [SKIP/SEL] will change
in the following order each time it is touched.
“OFF” → “SKIP” → “SELECT”
᲼ Ჹ Ჸ Ჽ Ჸ Ჸ
᲼ Ჹ Ჹ Ჽ Ჸ Ჾ
Ჹ Ჸ Ჸ
Ჺ Ჸ Ჸ
᲻ Ჸ Ჸ
Ჸ ᲼ Ჸ Ჸ
$#%- $#%-
5-+25'.
1 ((
& ' . & ' .
Tip Repeat Steps 2 and 3 to specify the other memories next.
4
Touch [BACK]
Return to the previous screen, and “

” will be displayed on the left side of the
memory channel number.
(2) Specify individually using the function menu screen
1
Switch to the memory mode, and recall the memory channel to be set as the
specified channel
2
Press
The function menu will be displayed.
3
Touch [SKIP/SEL] to display “SELECT”
“

” will be displayed on the left side of the memory
channel number.
Tip When [SKIP/SEL] is not displayed in the function menu,
touch [BACK] or [FWD] to change the menu.
The setting displayed under [SKIP/SEL] will change
in the following order each time it is touched.
“OFF” → “SKIP” → “SELECT”
Ჹ ᲼ Ჽ Ჾ Ჸ Ჸ
Ჹ Ჺ ᳀
; 1 - 1 * # / #
᲼ ᲻ ᲻ ᳀ Ჾ Ჸ
Ჽ Ჸ Ჸ 6 1 - ; 1 Ჺ ᲻
/ 76' 5%12' / 8 5 3 .
5-+25'.
1 ((
& 9
6Z29 4
* +
5 % # 0 4 ' 8
( 9 & $ # % -
Scan only the specified memory channels
1
First, select the band to be scanned, before switch to the memory mode
2
Press for one second or longer
The set-up menu will be displayed.
3
Touch
[MEMORY]
The menu list will be displayed.
$#%-
$#%-
6:4:
5'672/'07
4'5'6
%.10'
%10(+) 9 Ჰ 4'5
5%#0
&+52.#;
5+)0#.+0)
#245 126+1 0 5&%#4&
/'/14;
&#6#
%#..5+)0