Yaesu FTM-400XDR/DE, Руководство по эксплуатации

Страница: 62 / 220

62
DG-ID / DP-ID Function
Digital Group ID (DG-ID) feature
The DG-ID function can set up two-digit DG-ID numbers from “00” to “99” separately
for Transmit and Receive. By setting both transmit and receive to “00” (default), you
can communicate with all the other stations in the digital C4FM mode.By matching the
transmit DG-ID number to the uplink DG-ID number set in club the DR-2X/XE System
Fusion II digital repeater, you can access the digital repeater DR-2X/XE used in the club.
For communication only among a group of friend’s transceivers, you can all match the
same DG-ID number; then only your friend’s voices will be heard. Also, by using the GM
function you can check whether stations with the same DG-ID are in the communication
range.
Communicating only with the specific members by setting the
DG-ID number except for “00”.
1
Press and hold .
The DG-ID number setting screen is displayed.
Tip While setting the DG-ID number, pressing and holding
will set the transmit and the receive DG-ID numbers to
“00”.
DG-ID TX 00 00 DG-ID RX
DG-ID SETUP
BACK
BACK
2
Touch [DG-ID TX] .
The numbers of the set value will turn orange in color.
3
Rotate the (upper side) to set the transmit DG-ID
(DG-ID TX) to “50”.
DG-ID TX 00 50 DG-ID RX
DG-ID SETUP
BACK
BACK
4
Touch [BACK] , then rotate (upper side), or touch
the screen to select “DG-ID RX”.
“DG-ID RX” will turn orange.
DG-ID TX 00 50 DG-ID RX
DG-ID SETUP
BACK
BACK
5
Touch [DG-ID RX] .
The numbers of the set value will turn orange in color.
6
Rotate the (upper side) to set the receive DG-ID
(DG-ID RX) to “50”.
DG-ID TX 50 50 DG-ID RX
DG-ID SETUP
BACK BACK
DG-ID / DP-ID Function