Yaesu FTM-400XDR/DE, Руководство по эксплуатации

Страница: 29 / 220

29
Installation and Connection
Connecting the Radio
Connecting the controller to the main body
Caution
Make sure the power supply is switched OFF before connecting the cable between the controller and
the main body.
1
Plug the connector of the controller cable into the
[CONTROL] jack at the front of the main body
until a click sound is heard
本体
コントロール
ケーブル
Main
body
Controller
cable
2
Plug the other connector of the controller cable
into the [CONTROL] jack at the back of the
controller until a click sound is heard
コントロールケーブル
コントローラ Controller
Controller cable
Connecting the microphone
1
Plug the microphone connector into the [MIC]
jack at the front of the main body until a click
sound is heard
Tips • To remove the microphone, pull the connector out
while pressing the latch.
• A microphone extension cable (about 3 m long) is
included in optional microphone extension kit “MEK-
5”. Use it to install the microphone in locations which
cannot be reached by the attached microphone cable.
LOCK
P3
P2
P1
7
1
4
8
2
0
5
9
B
A
C
D
3
6
P4
LAMP
DTMF MICROPHONE
MH-48
ABC
JKL
TUV
GHI
PQRS
DEF
MNO
WXYZ
MIC
コネクタ
マイクロホン Microphone
Connector
Connecting the antenna
1
Attach the antenna co-axial cable to the [ANT]
terminal at the back of the main body and tighten
the connector
同軸ケーブル端子
本体（後面）
Main body
(rear side)
Co-axial cable connector