Yaesu FTM-400DR, Руководство по эксплуатации

Страница: 94 / 219

94
Using the GPS Function
Using the Smart Navigation Function
●
Changing the direction of the compass panel
The compass panel can be selected from “Heading UP” where the direction of your
travel is always displayed at the top, or “North UP” where north is always displayed at
the top.
1
Touch the compass needle
The compass panel will switch between “Heading
UP” and “North UP” each time the compass needle is
touched.
The direction of the current compass panel will be
Indicated near the top left of the screen.
Tip
Although the scale on the compass panel has 16 directions, the
compass needle can point in 32 directions.
%1/2#55 &+56#0%'
/ ;
; 4
. Ჺ
. Ჹ
/'/14;
Ჸ Ჽ Ჹ Ჺ Ჹ ᲼ Ჽ Ჾ Ჺ
Ჸ ᳁ ᳁ ᳁
MO
0
9
'
5
Ჹ ,# <4. Ჺ ᲻ Ჹ
%1/2#55 &+56#0%'
/ ;
; 4
. Ჺ
. Ჹ
/'/14;
Ჸ Ჽ Ჹ Ჺ Ჹ ᲼ Ჽ Ჾ Ჺ
Ჸ ᳁ ᳁ ᳁
MO
0
9 '
5
Ჹ ,# <4. Ჺ ᲻ Ჹ
Using the real-time navigation function
1
Switch to the Compass screen
2
Touch [YR]
During transmission in the V/D mode, the distance
and direction of the received partner station is
displayed.
Tip When a partner station is selected using the GM function
and displayed on the compass screen, the “●” on the left
hand side of the partner station call sign will blink.
When “●” is blinking, the compass display will not
be updated even when signals containing position
information from stations other than that displayed are
received.
%1/2#55
Ჸ Ჹ ᲼ Ჽ Ჾ Ჺ
&+56#0%'
/ ;
; 4
. Ჺ
. Ჹ
/'/14;
Ჽ Ჹ Ჺ
MO
␃ ␃ ␃ ␃
Ჽ 6 -; 1 1 Ჺ ᲻ Ჸ Ჸ
0
9
'
5
When [YR] is touched, “●” will light up and the compass display will be updated when signals
containing position information from stations other than that displayed are received.
%1/2#55
Ჸ Ჹ ᲼ Ჽ Ჾ Ჺ
&+56#0%'
/ ;
; 4
. Ჺ
. Ჹ
/'/14;
Ჽ Ჹ Ჺ
Ჸ ᳁ ᳁ ᳁
MO
0
9
'
5
Ჹ ,# <4. Ჺ ᲻ Ჹ
Direction of partner station
Partner station information
in display
Distance to partner station