24
FTM-3200DR/DE Advance Manual
Setup (Menu) Mode
The FTM-3200DR Setup (Menu) mode, already described in parts of many previous
chapters, is easy to activate and setup. The Menus may be used to configure many
of transceiver parameters, some of which have not been detailed previously. Use the
following procedure to activate the Setup (Menu) mode:
1. Press and hold the [
MHz
(
SETUP
)] key for
one second to enter the Setup menu.
2. Rotate the
DIAL
knob to select the Menu
Item to be adjusted.
3. Press the [
MHz
(
SETUP
)] key momentarily
to enable adjustment of the selected Menu
item, and then rotate the
DIAL
knob to per-
form the actual adjustment.
4. After completing the selection and adjust-
ment, press and hold the [
MHz
(
SETUP
)] key
for one second to exit the Setup menu and
resume normal operation.
VOL
DIAL
SQL
TXPO
D W
M W
SETUP
REV
D/A
V / M
M H z
Menu Item
Function
Available Values
Default
1: APO
Enables/Disables the Automatic Power
Off feature.
0.5H to 12H (0.5H step) /
OFF
OFF
2: BCLO
Enables/Disables the Busy Channel
Lock-Out feature.
ON/OFF
OFF
3: BEP KEY
Enables/Disables the key beeper.
KEY+SCAN / KEY / OFF KEY+SCAN
4: BEP EDGE
Enables/Disables the Band-edge beeper
while scanning.
ON/OFF
OFF
5: BEP STBY
Enables/Disables the Standby beep.
ON/OFF
ON
6: BELL
Selects the CTCSS/DCS/EPCS Bell Ring-
er repetitions.
1 to 20 / CONTINUE /
OFF
OFF
7: CLK TYPE
Shifting of the CPU clock frequency.
A / B
A
8: DC VOLT
Indicates the DC Supply Voltage.
---
---
9: DCS CODE
Setting of the DCS code.
104 standard DCS codes
023
10: DCS INV
Select a combination of DCS inversion
codes in terms of communication direc-
tion.
NORMAL / INVERT /
BOTH
NORMAL
11: DIG AMS
Sets the transmission mode.
TX MANUAL / TX FMFIX
/ TX DNFIX / AUTO
TX MANUAL
12: DI POPUP
Sets the information pop-up time.
2 / 4 / 6 / 8 / 10 / 20 / 30
/ 60 / CONTINUE / OFF
10 SEC
13: DPID LST
DP-ID list (Display/Register/Clear)
(Registered DP-ID)
---
14: DT AUTO
Enables/Disables the DTMF Autodialer
feature.
MANUAL / AUTO
MANUAL
15: DT DELAY
Setting of the DTMF Autodialer TX Delay
Time.
50 / 250 / 450 / 750 /
1000
450 MS
16: DT SET
Loading of the DTMF Autodialer Memo-
ries.
---
---
