40
Memory list mode that automatically displays the memory channel list
Turning the
DIAL
knob in memory mode usually increases or decreases the memory
channel number. Rotating the
DIAL
knob automatically displays the memory channel
list and allows recalling the desired memory channel while checking the contents of
the listed memory channels.
Setting
1. Press and hold the [
F
MENU
] key → select [
19 MEMORY LIST MODE
] and press
the
DIAL
knob.
2. Rotate th
e DIAL
knob to select [
ON
].
3. To return to the normal operation screen from the Function List, press a key other
than the power switch or
PTT
.
To return to normal up / down operation, set “
OFF
” in step 3 of the above operation.
Operation
1. When the
DIAL
knob is turned in the memory mode, the memory channel list is
automatically displayed.
Press the [
BAND
GRP
] key to switch to the display for each frequency band by the
memory auto grouping (MAG) function (see below).
2. Rotate th
e DIAL
knob to select the desired memory channel and press the
DIAL
knob.
3. The memory channel is recalled.
Recall only memories in the same frequency band (Band)
using the memory auto grouping (MAG) function
With the memory auto grouping (
MAG
) function, only memory channels in the same
frequency band (Band) can be called.
In the memory mode, each time the [
BAND
GRP
] key is
pressed, only memory channels of the specified frequency
band are automatically recalled as a group, as shown below:
Press
All memory channels
（AIR Band）
108MHz - 137MHz
memory channel
137MHz-174MHz
memory channel
400MHz-480MHz
memory channel
174MHz - 400MHz
480 MHz - 999.995MHz
memory channel
When “
” is selected, the MAG function is turned Off and all memory channels can be
recalled.