Yaesu FTM-200DR, Руководство для продвинутых пользователей

Страница: 57 / 67

57
WIRES-X
For details on setting each item, refer to “FTM-200DR/DE WIRES-X Instruction Manual”
which is available on Yaesu website.
DATA
66 COM PORT
Set the communication speed and parameters for the COM port DATA jack on the rear
panel of the transceiver.
1. Press and hold the [
F
MENU
] key

[ 66 COM PORT ]

Press the DIAL knob
The parameter settings screen appears.
SPEED
Setting the communication speed.
1. Rotate the
DIAL knob to select [ SPEED ] then press the DIAL knob.
2. Rotate the DIAL to select the desired communication speed then press the DIAL
knob.
The setting switches as follows:
4800bps / 9600bps / 19200bps / 38400bps / 57600bps
OUTPUT
Select the function of COM port output.
1. Rotate the
DIAL knob to select [ OUTPUT ] then press the DIAL knob.
2. Rotate the DIAL to select the data output type then press the DIAL knob.
OFF The COM port is deactivated.
GPS OUT Outputs the GPS receiver satellite data.
PACKET Outputs the AX.25 packet data from the internal modem.
WAYPOINT Outputs the APRS packet WAYPOINT beacon information of other
stations acquired from the received data.
WP FORMAT
Set the number of digits for CALLSIGN information of APRS BEACON stations,
attached to various data, when WAYPOINT is selected for OUTPUT.
1. Rotate the
DIAL knob to select [ WP FORMAT ] then press the DIAL knob.
2. Press the
DIAL
to select the number of digits of the APRS beacon station call sign
information which is added to each data.
NMEA 9 Displays the last 9 digits of the call sign (Example: JA1YOE-14 is
output as “JA1YOE-14”).
NEMA 8 Displays the last 8 digits of the call sign (Example: JA1YOE-14 is
shortened to “A1YOE-14”).
NMEA 7 Displays the last 7 digits of the call sign (Example: JA1YOE-14 is
shortened to “1YOE-14”).
NMEA 6 Displays the last 6 digits of the call sign (Example: JA1YOE-14 is
shortened to “YOE-14”).