Yaesu FTM-200DR, Руководство для продвинутых пользователей

Страница: 55 / 67

55
48 WX ALERT
Setting the weather Alert Feature, to notify of storms and hurricanes, ON or OFF.
1. Press and hold the [
F
MENU
] key

[ 48 WX ALERT ]

Press the DIAL knob
2. Press the DIAL knob to select the desired setting.
ON Enables the Weather Alert Feature.
OFF Disables the Weather Alert Feature.
SCAN
49 SCAN
Start or stop scanning for channels in VFO mode or Memory mode.
1. Press and hold the [
F
MENU
] key

[ 49 SCAN ]

Press the DIAL knob
Refer to the Operating Manual for details.
NOTE
: This item is registered in the custom function menu by factory setting.
50 DUAL RCV MODE
Activate the Priority Scan function or A-B Dual Receive function.
1. Press and hold the [
F
MENU
] key

[ 50 DUAL RCV MODE ]

Press the DIAL knob
2. Rotate the DIAL knob to select the desired setting.
OFF / PRIORITY SCAN / A-B DUAL RECEIVE
To transmit and receive APRS or DATA communication on the Sub Band (lower side), it is
necessary to set [A-B DUAL RECEIVE] in “50 DUAL RCV MODE”.
Refer to the Operating Manual for details.
51 DUAL RX INTERVAL
Set the time interval to check for a signal on the priority channel (HOME channel) during
the priority scan.
1. Press and hold the [
F
MENU
] key

[ 51 DUAL RX INTERVAL ]

Press the DIAL knob
2. Rotate the
DIAL
knob to select the desired setting.
0.5sec / 1.0sec / 2.0sec / 3.0sec /
5.0sec
/ 7.0sec / 10sec
Refer to the Operating Manual for details.
52 PRIORITY REVERT
Set to always Transmit on the priority channel (HOME channel) when PTT is pressed
during dual receive operation.
1. Press and hold the [ F
MENU
] key

[ 52 PRIORITY REVERT ]

Press the DIAL knob
2. Rotate the DIAL knob to select the desired setting.
ON Always send on the priority channel (HOME channel).
OFF Sends at the currently displayed frequency.