Yaesu FTM-200DE, Руководство по эксплуатации

Страница: 61 / 82

59
z
Activating the A-B Dual Receive
1. Press and hold the [ F menu ] key.
2. Rotate the DIAL knob to select [ 50 DUAL RCV MODE ], then press the DIAL knob.
3. Rotate the DIAL knob to select [ A-B DUAL RECEIVE ], then press the DIAL knob.
4. Press any key (except Power Switch) or PTT switch to finish the setting and return to
the original screen.
z
Disable the A-B Dual Receive
1. To cancel A-B Dual Receive, just repeat the above procedures, selecting “
OFF
” in step
3 above.
Using the Voice Recorder
The voice recording function automatically starts recording when a signal is received, and
pauses when there is no signal. Can be record the received audio of the other station or
the transmitted audio of the FTM-200DR/DE to a microSD memory card for a long time.
The recorded file can be played back with the FTM-200DR/DE or the MicroSD memory
card can be taken out and used on a PC.
Once recording is started, it continues until recording is stopped, or the capacity of the
microSD card is full.
z
About the file
• The audio file is saved in the “VOICE” folder on the MicroSD card.
• The file is a Wave sound format (extension: wav).
• The file name is “YYYYMMDDmmhhss.wav” (YYYY: year, MM: month, DD: day, hh: hour,
mm: minute, ss: second) depending on the date and time when the recording started.
• When using the MicroSD memory card for the first time, please refer to “Formatting a MicroSD
Memory Card” on page 27
• Since the date and time are used for the file name and time stamp, it is recommended to
receive GPS or set the date and time in advance when using the voice recording function.
Press and hold the [ F menu ] key → [ 28 DATE&TIME ADJUST ] (page 68)
Recording the receive audio
1. Press and hold the [ F menu ] key.
2. Rotate the DIAL knob to select [ 39 REC/STOP ], then
press the DIAL knob.
“REC” is displayed, and the recording function starts.
3. Press any key (except Power Switch) or PTT to finish the
complete the setting and return to the original screen.
• “ ” is displayed at the top of the LCD, the transceiver
enters the recording standby mode.
• When a signal is received, recording starts
automatically. During recording, the “ ” indication
changes to “ ”.
• Recording will be paused about 3 seconds after
the squelch of the band that is recording is closed.
Recording will resume when a signal is received.
• With the factory default settings, the “A-band” received
audio is recorded.
Press and hold