Yaesu FTM-200DE Скачать руководство пользователя страница 54

Страница: 54 / 82

• When the connection is complete, the [

DEVICE

] field

will display “Name of the connected Bluetooth

headset”

and the [

STATUS

] field will display “Connected”.

• The LED of SSM-BT10 blinks blue. The pairing is

completed.

OPTION
107 Bluetooth

SSM-BT10

DEVICE

Bluetooth

Connected

STATUS

OFF

SAVE

Connected

STATUS

11. To return to the normal operation screen, press a key other than the power switch or

PTT.

While connected to a Bluetooth

headset, the “ ” icon lights up on the FTM-200DR/DE

screen, and the received audio and operation beep will be heard from the

Bluetooth

headset.

Disable the Bluetooth

function

To cancel the Bluetooth

operation, just repeat the above procedures, selecting “

OFF

”

in step 5 above.

Subsequent Bluetooth

headset connection when the power is turned ON

• When the power is turned

OFF

while the Bluetooth

headset is connected, the next

time the power is turned

, the same Bluetooth

headset is searched for and

automatically connected when found.

• If the Bluetooth

headset cannot be found, the “ ” icon blinks on the screen. If the

power of the same Bluetooth

headset is turned ON in this state, it will connect

automatically. If not, turn the FTM-200DR/DE and Bluetooth

headset OFF and then

ON again.

• To connect to other Bluetooth

headsets, refer to “Connect with another Bluetooth

headset” on page 55.

Activate Transmit by pressing the button on the Bluetooth

headset (when

the VOX function is OFF)

When the Multi-Function Key is pressed, a beep will sound

and the FTM-200DR/DE will continuously transmit.

Press the Multi-Function Key again, a beep will sound and

the FTM-200DR/DE will return to receive mode.

Press briefly to transmit

Hands-free VOX operation with a Bluetooth

headset

When FTM-200DR/DE VOX (automatic voice transmission) function is turned ON, the

Bluetooth

headset can perform hands-free operation and transmit automatically just by

talking. Turn the VOX function ON according to “VOX Operation” instructions.

The VOX function is commonly used for the Bluetooth

headset and microphone.

If you do not use the Bluetooth headset and do not want to use the VOX function with the

microphone, set this to “

OFF

”.

Содержание FTM-200DE



















































































Результаты поиска

Содержание FTM-200DE

Отзывы:

Похожие инструкции для FTM-200DE

Бренды по названию

Популярные бренды

Yaesu FTM-200DE, Руководство по эксплуатации

Результаты поиска

Содержание FTM-200DE

Отзывы:

Похожие инструкции для FTM-200DE

Бренды по названию

Популярные бренды