background image

47

Manual Mode

•  The channel is fixed, and you can turn the DIAL knob 

to select the desired channel and communicate.

•  If there is no signal on the selected channel, scanning  

continuously displays the reception status (signal 

strength) of other channels in a bar graph. (Received 

audio is not output even if there is a signal on another 

channel.)

Operation example 

in Manual Mode

YAESU MUSEN

Since there is no signal on the selected 

PMG 2CH, the bar graph is displayed 

continuously. 

•  If there is a signal on the selected channel, the received 

audio is output. During audio output, the bar graphs of 

the other channels hold their last state and pause.

•  When the signal on the selected channel concludes, 

scan is automatically restarted and the bar graph is 

displayed continuously.

YAESU MUSEN

Since the signal was received by the 

selected PMG 2CH, the bar graph 

display is paused and the received 

sound is output. 

Operation of Manual Mode

•  In manual mode, the channel is fixed. Rotate the 

DIAL

 knob to select the desired 

channel.

•  Press PTT to communicate with other stations on the selected PMG channel.
•  Each time the 

DIAL

 knob is pressed, the auto mode and manual mode are toggled. 

Unregister the channel (frequency) registered in PMG

Up to 5 channels can be registered in PMG. To register a new frequency, cancel the 

registration of one frequency and then register the new frequency.
1.  Select the channel (frequency) to be unregistered by touching the bar graph or rotating 

the 

DIAL

 knob.

2.  Press and hold the [

PMG 

PW

 

] key to cancel the registration.

•  Channels after the canceled channel have the previous number.
•  When all registered channels are lost, PMG will be canceled and the screen will 

return to the original screen.

Cancel all frequency (channels) registered in PMG.

1.  Press and hold the [

menu

] key

 → [

20 PMG  CLEAR

]

2.  Press the 

DIAL

 knob.

Содержание FTM-200DE



















































































Отзывы: