20
Displays the operating mode (Digital modes are indicated by a red icon):
: FM (Analog) mode
: V/D mode (Simultaneous voice and data communication mode)
: Voice FR mode (Voice full-rate mode)
: Data FR mode (High speed data communication mode)
: AMS (Automatic Mode Select) FM (Analog) mode
: AMS (Automatic Mode Select) DN mode
: AMS (Automatic Mode Select) VW mode
: AMS (Automatic Mode Select) DW mode
*
When AMS (Automatic Mode Select) function is activated, the indicator is shown
with a bar appearing above the mode. The transceiver automatically switches to the
DW mode during image transmission.
: S meter (Displays received signal strength in 10 levels)
:
PO meter (Displays transmit output in 3 levels when transmitting)
: Volume level
: SQL level
Descriptions of Main Screens
z
Normal screen (VFO screen)
A-band and B-band are shown at the top and bottom of
the display.
• The band displayed on the top of the screen is operat-
ing band.
• Press and hold the [
A/B
] key to turn the Sub Band
display off.
NOTE:
The A-band and B-band cannot be received at
the same time.
z
Band Scope screen
Press the [
DISP
] key to display the Band Scope screen.
The strengths of received signals above and below the current frequency or memory
channel are shown in a bar graph while sweeping at high speed. The audio of the
center frequency is heard without interruption.
• Rotate the
DIAL
knob to change the center frequency
or memory channel.
• In VFO mode 61 or 31channles can be searched. In
memory mode 21 or 11 channels can be searched by
