30
Screen Saver
A Screensaver, to prevent burning of the TFT
screen will operate after a set time, if no trans-
ceiver function is operated.
1. Press the [FUNC] key.
2.
Select [DISPLAY SETTING] → [DISPLAY] →
[SCREEN SAVER].
3. Select the time until the screen saver is em-
ployed (default setting is 60 min).
OFF
Screensaver is not employed.
15min
Screensaver activates after 15 minutes.
30min
Screensaver activates after 30 minutes
60min
Screensaver activates after 60 minutes
4. Press the [FUNC] key to save the new setting
and exit the Setting Menu.
5. Press the [FUNC] key to exit to normal operation.
Adjust contrast
Adjust the contrast of the TFT display.
1. Press the [FUNC] key.
2.
Select [DISPLAY SETTING]→[DISPLAY]→
[TFT CONTRAST].
3. Turn the [MULTI] knob to adjust the contrast
(default setting is 10).
4. Press the [FUNC] key to save the new setting
and exit the Setting Menu.
5. Press the [FUNC] key to exit to normal operation.
Adjusting the brightness
(Dimmer)
Adjust the brightness of the TFT display and LED
indicators.
1. Press the [FUNC] key.
2.
Select [DISPLAY SETTING]→[DISPLAY].
3. Select the item whose brightness you want to
adjust.
TFT DIMMER
Display (default 15)
LED DIMMER
LED indicators (default 10)
4. Turn the [MULTI] knob and adjust the bright-
ness.
5. Press the [FUNC] key to save the new setting
and exit the Setting Menu.
6. Press the [FUNC] key to exit to normal operation.
Font setting for
frequency display
The height of the frequency display can be varied.
BOLD (Default)
LIGHT
1. Press the [FUNC] key.
2.
Select [DISPLAY SETTING]→[DISPLAY]→
[FREQ STYLE].
3. Select “LIGHT” or “BOLD”.
4. Press the [FUNC] key to save the new setting
and exit the Setting Menu.
5. Press the [FUNC] key to exit to normal operation.
Inputting the Call Sign
Registered call signs names, and characters can
be displayed on the opening screen when the
power is turned ON.
1. Press the [FUNC] key.
2.
Select [DISPLAY SETTING] →[DISPLAY] →
[MY CALL].
3. Touch a character key. The touched character
will be displayed at the top of the screen. En-
ter each character of your call sign.
Up to 12 characters (letters, numbers, and
symbols) can be entered.
Caps
The input switches between lower and
upper-case letters each time this symbol is
touched.
One character to the left of the cursor is
erased when this symbol is touched.
BACK
The display returns to the previous screen
when this symbol is touched.
/
The cursor in the input field moves left or
right when these symbols are touched.
Space
Insert space
ENT
The entered characters are confirmed and
the display returns to the previous screen
when this symbol is touched.
4. Touch [ENT] .
5. Press the [FUNC] key to save the new setting
and exit the Setting Menu.
6. Press the [FUNC] key to exit to normal operation.
