Yaesu FTDX10, Руководство по эксплуатации, Страница: 82 / 123

The Menu system of the FTDX10 provides extensive customization capability. The transceiver functions
can be tailored for the most demanding operators. The Setting Menus are grouped into five specific utili -
zation categories.
Date, SD Card Settings, Firmware
Version Display, Reset Operation.
SSB, AM, FM & Data Communication
(such as RTTY)
CW operating Setting Display Setting
Comprehensive settings such as: Transmit & Receive,
Interference Reduction, Memory, Scan, etc.
Using the Menu
1. Press the [FUNC] knob.
2. Touch the category item that is to be set (see above).
3. Touch the desired item, or rotate the [FUNC] knob to select the desired item, then press the [FUNC]
knob.
4. Rotate the [FUNC] knob to select the desired item, then touch the item, or rotate the [FUNC] knob to
select the desired item, then press the [FUNC] knob.
5. Rotate the [FUNC] knob, or touch “<” or “>” on either side of the value setting that is to be changed.
6. Press the [FUNC] knob or leave it for about 2 seconds to save the new settings.
7. Touch [BACK] several times to return to normal operation.
Reset the Setting Menu
Use this procedure to restore the Menu settings to their factory defaults, without affecting the Pro -
grammed Frequency Memories.
1. Press the [FUNC] knob.
2. Select [EXTENSION SETTING] → [RESET] .
3. Touch “DONE” of the “MENU CLEAR” item.
The reset confirmation screen will be displayed.
4. Touch “OK” or press the [FUNC] knob to reset.
(Touch “CANCEL” to cancel the reset)
5. Once the power is turned OFF, it will turn ON automatically afterwards.
Setting Menu reset is complete.
Setting Menu
81