Yaesu FTDX10, Руководство по эксплуатации, Страница: 58 / 123

57
CW Decode
Alphanumeric Morse code can be decoded and
displayed as text on the TFT Panel.
Interfering signals, noise, propagation phasing,
and code inaccuracy, may prevent accurate
message copy.
1. Set the operating mode to CW.
2. Press the [FUNC] knob, and then touch [CW
SPEED] and turn the [FUNC] knob to closely
match the speed of the received CW signal.
If the speed is significantly different, it may
not be deciphered correctly.
3. Press the [FUNC] knob.
4. Touch [DECODE] .
The CW DECODE screen is displayed, and
the decoded message text will appear on the
screen.
CQ CQ CQ DE W6DXC W6DXC W6DXC K
● If extraneous characters are displayed, due
to noise and clutter when a CW signal is not
being received, touch [DEC LVL] and then
rotate the [FUNC] knob to adjust the thresh-
old level.
5. To cancel the CW decode function, touch
[DEC OFF].