manualshive.com logo in svg

Yaesu FTDX10, Руководство по эксплуатации, Страница: 32 / 123

Поделиться
Скачать
Yaesu FTDX10 Скачать руководство пользователя страница 32

31

LED Indications

Displays the transmit/receive status of the transceiver, and the MPVD ring “FINE” and “STEP”.

Memory Mode

RX/TX

Indicators

VFO-A

RX/TX

Indicators

VFO-B

RX/TX

Indicators

RX Indicator TX Indicator

Fine Tuning Indicator

STEP Indicator

1.  Press the [FUNC] knob.

2.  Touch [DISPLAY SETTING]   or rotate the 

[FUNC] knob to select [DISPLAY SETTING] 

and then press the [FUNC] knob.

3 .  

T o u c h   [DISPLAY] → [LED  DIMMER]  or 

rotate the [FUNC] knob to select an item and 

press the [FUNC] knob.

4.  Rotate the [FUNC] knob, or touch “<” or “>” 

on either side of the value to adjust the bright-

ness.

5.  Press the [FUNC] knob to save the new set-

ting.

6.  Touch [BACK] several times to return to nor-

mal operation.

BUSY

:  This indicator illuminates when the squelch 

opens.

TX

: 

This indicator illuminates during transmission.

Memory Mode RX/TX Indicators

Green (Left):

This indicator illuminates when the receiver is ac-

tive on the memory channel.

Red (Right):

This indicator illuminates when the transmitter is 

active on the memory channel.

VFO-A RX/TX Indicators

Green (Left):

This indicator illuminates when the receiver is ac-

tive on the VFO-A.

Red (Right):

This indicator illuminates when the transmitter is 

active on the VFO-A.

VFO-B RX/TX Indicators

Green (Left):

This indicator illuminates when the receiver is ac-

tive on VFO-B.

Red (Right):

This indicator illuminates when the transmitter is 

active on the VFO-B.

FINE

:  This indicator illuminates when the frequency 

can be adjusted in 1 Hz steps by the MPVD 

ring.

● The AM, FM, DATA-FM modes may be ad

-

justed in 10Hz steps.

STEP

:  This indicator illuminates when the frequency 

changes at predetermined steps of the MPVD 

ring.

• 

Adjust the brightness of the LED indicator

Adjusts the brightness (illuminance) of the LED indicator.

Содержание FTDX10




























































































































Отзывы:

Нет отзывов