Yaesu FTDX10, Руководство по эксплуатации

Страница: 26 / 123

25
• FIX
To use Fixed Mode, enter the start frequency of the
scope.
Display area start frequency
Marker* (Reception Frequency)
Marker* (Transmit Frequency)
Current display mode (FIX)
Sweep Speed
Scope Screen frequency span (display range).
The upper limit frequency of the display area.
*At factory shipment, marker display is ON.
FIX is displayed at the top of the scope screen.
Press and hold [FIX] while FIX is displayed, the fre-
quency input screen will be displayed, and the start
frequency can be entered:
Example:
To enter 7.000.000 MHz
[0]→[7]→[ENT] or [7]→[.]→[ENT]
To enter 7.030.000 MHz
[7]→[.]→[0]→[3]→[ENT]
• 3DSS
Switch between the 3DSS display and the waterfall
display.
The display will change each time it is touched:
3DSS type
Waterfall type
Each time the Waterfall Display is touched,
the size of the display changes as follows.
à
à
• MULTI
In addition to the scope display, the oscilloscope
and AF-FFT are also presented.
Touch again to return to the original screen.
Touch this area to set the attenuator.
Touch this area to set the level and sweep speed.