Yaesu FTDX10 Скачать руководство пользователя страница 106

Страница: 106 / 123

OPERATION SETTING

- TUNING -

SSB/CW DIAL STEP

Function: Setting of the MAIN dial tuning speed

in the SSB and CW mode.

Available Values: 5 / 10 (Hz)

Default Setting: 10

RTTY/PSK DIAL STEP

Function: Setting of the Main dial knob tuning

speed in the RTTY and PSK mode.

Available Values: 5 / 10 (Hz)

Default Setting: 10

CH STEP

Function:

Selects

the tuning steps for the MPVD

ring.

Available Values: 1 / 2.5 / 5 / 10 (kHz)

Default Setting: 10kHz

AM CH STEP

Function: Selects the tuning steps for the MPVD

ring in the AM mode.

Available Values: 2.5 / 5 / 9 / 10 / 12.5 / 25 (kHz)

Default Setting: 10kHz

FM CH STEP

Function: Selects the tuning step

s for the MPVD

ring in the FM mode.

Available Values: 5 / 6.25 / 10 / 12.5 / 20 / 25 (kHz)

Default Setting: 10kHz

MAIN STEPS PER REV.

Function: Setting the steps per rotation of the

MAIN dial.

Available Values: 250 / 500 / 1000

Default Setting: 500

MPVD STEPS PER REV.

Function:

Setting the steps per rotation of the

MPVD ring.

Available Values: 250 / 500

Default Setting: 500

DISPLAY SETTING

- DISPLAY -

MY CALL

Function: Programs a Call Sign or Name.

Available Values: Up to 12 alphanumeric charac-

ters

Default Setting: FTDX10

Description: Set characters to be displayed on

the power ON opening screen.

MY CALL TIME

Function: Set the time for displaying characters

registered in “MY CALL”.

Available Values: OFF / 1 / 2 / 3 / 4 / 5 (sec)

Default Setting: 1sec

Description: Set the time “My Call is displayed on

the opening screen after power ON.

SCREEN SAVER

Function: Time setting before the screen saver to

activate.

Available Values: OFF / 15 / 30 / 60 (min)

Default Setting: 60min

Description: If the transceiver is not operated for

the set time, a screen saver will acti-

vate to prevent TFT screen burns.

TFT CONTRAST

Function:

Sets the TFT contrast level.

Available Values: 0 - 20

Default Setting: 10

TFT DIMMER

Function: Sets the TFT display brightness level.

Available Values: 0 - 20

Default Setting: 15

Description: The higher the setting, the brighter

the illumination becomes.

LED DIMMER

Function: Sets the key LED brightness level.

Available Values: 0 - 20

Default Setting: 10

Description: The higher the setting, the brighter

the illumination becomes.

MOUSE POINTER SPEED

Function: Mouse pointer movement speed set-

ting.

Available Values: 0 - 20

Default Setting: 10

Description: The higher the setting, the faster the

Mouse pointer will move.

FREQ STYLE

Function: Frequency display font setting.

Available Values: LIGHT (thin) / BOLD (thick)

Default Setting: BOLD

105

Содержание FTDX10




























































































































Результаты поиска

Содержание FTDX10

Отзывы:

Yaesu FTDX10, Руководство по эксплуатации, Страница: 106 / 123

Результаты поиска

Содержание FTDX10

Отзывы: