Yaesu FTA-250L, Руководство по эксплуатации

Страница: 16 / 36

FTA-250L O
perATing
M
AnuAL
14
The channel in use is black, and the unused channels
are white.
Channel in use Unassigned Channel
3. Press and hold the [ENT] key.
(When not entering a nametag, go to step 7)
4. Select and enter the nametag characters with the
[DWN] / [UP] keys or the numeric keypad.
z
Each time the [DWN] or [UP] key is pressed, the
characters change as follows:
Û
0
～
9
Û
A
～
Z
Û
symbol
Û
0
～
9
Û
z
Example: Each time the [2] key is pressed the
characters change as follows:
2
à
A
à
B
à
C
à
2
à
5. Press the [ENT] key to move to the right digit.
6. Repeat steps 4 and 5 to complete the nametag.
7. Press and hold the [ENT] key.
Frequency and name are registered and operation
is returned to the normal operation screen.
Recalling the Memories
1. Press the [MAIN/SET]
key.
2. Press the [GROUP](
)
key.
The last tuned memory
channel will be received.
Alternately, the last used memory group may be recalled
by pressing the [GROUP] key without performing
operations 1 and 2 above.
3. Press the [GROUP] key to select a memory group.
4. Press the [DWN] or [UP] key to select a memory
channel in the group.
Or press the numeric keypad to enter the memory
channel number.
For example, to recall memory channel #005,
press
[
0
]
à
[
0
]
à
[
5
].
z
Only the memories registered in the current memory
group may be selected.
z
To switch to another memory group, press the
[GROUP] key.