47
8 OPENING MESSAGE
You can select the message under the “YAESU” logo displayed when turning on the
transceiver.
1. Press and hold the [
F
MENU
] key
touch [
DISPLAY
]
[
8 OPENING MESSAGE
]
2. Rotate the DIAL knob to select the desired message referring to the following table.
OFF
Displays the receive frequency instead of the opening message
immediately after turning on the power.
DC
Displays the power-supply voltage and time when turning on the
power.
MESSAGE
Displays a message comprising up to 16 characters when turn-
ing on the power. Press the [
F
MENU
] key to switch the screen to
the message registration screen. For details on how to enter the
message to be displayed, refer to the “Text input screen” in the
Operating Manual. Press the [
F
MENU
] key when you have finished
entering the characters.
Remark
The default setting: DC
9 SENSOR INFO
Display the battery voltage. When the optional external power supply adapter with a cig-
arette plug (SDD-13) is connected, the power supply voltage of this adapter is displayed.
1. Press and hold the [
F
MENU
] key
touch [
DISPLAY
]
[
9 SENSOR INFO
]
2. The battery voltage is shown on the LCD.
• The indication differs depending on the type of the power supply used.
Battery pack: “
Lit
”
Battery case: “
Dry
”
External power supply adapter: “
Ext
”
• During mono band receive, the voltage can be displayed on the LCD constantly.
10 SOFTWARE VERSION
Display the software version.
1. Press and hold the [
F
MENU
] key
touch [
DISPLAY
]
[
10 SOFTWARE VERSION
]
2. The software versions of “Main”, “Sub” and “DSP” are shown.
