49
•
The band scope channel interval is the same as the VFO frequency step.
•
In the frequency range of 108 MHz to 580 MHz, “
FULL
” is displayed and scanning continues
continuously. The received audio can be heard during the scan.
• • In frequency ranges other than 108 MHz to 580 MHz, “
1Time
” is displayed, and scanning is
stopped after one scan. Received audio is not heard during scanning. If [
SEARCH
] is touched or
the
DIAL
knob is turned to change the frequency, one scan will be performed automatically.
For additional details on the CAM (Club Channel Activity Monitor), refer to the Advanced
Manual which may be downloaded from the Yaesu website.
CAM (Club Channel Activity Monitor) function
Up to 10 groups with 5 channels each, of frequently used memory channels may be
registered, and then while receiving the current frequency, the status (signal strength) of
the selected group of memory channels may be displayed. It is easy to identify on which
channel the communication was made.
When a memory channel on the graph is touched, it will become the center operating
frequency, so communication with friends may begin immediately.
Using the Voice Recording
With the voice recording function, the received audio of the other station, and/or the
transmit audio of this unit is recorded on the microSD memory card. The recorded file
can be played back with FT3DR/DE or the microSD memory card can be taken out and
used on a PC.
Once recording is started, recording continues until recording is stopped, or the capacity
of the microSD card is full.
About the file
•
The audio file is saved in the “VOICE” folder on the microSD card.
•
The file format is a Wave sound format file (extension: wav).
•
The file name is “YYMMDDmmhhss.wav” (YY: year, MM: month, DD: day, hh: hour,
mm: minute, ss: second) depending on the date and time when the recording started.
•
•
Since the date and time information is used for file names and file timestamps, when using
the voice recording function, it is recommended to set the date and time of the transceiver in
advance by referring to “19 Setting Clock Time” on page 82 It is recommended.