Yaesu FT DX 9000D TFT, Руководство по эксплуатации, Страница: 5 / 52

FT
DX
9000 TFT O
PERATION
M
ANUAL
B
EFORE
U
SING THE
TFT D
ISPLAY
M
ENU
M
ODE
O
PERATION
If you want to change a configuration setting of this
radio, you are able to display the Menu mode on the
TFT screen, so you can change it efficiently. In order
to enter the “Menu” mode, press the [
MNU
] key mo-
mentarily; the Menu screen will now appear on the
screen. By rotating the Main Tuning knob, you can
move to the desired item you want to change now
you can choose the revised setting by rotating the
CLAR/VFO-B knob. It is also possible to move the
Menu items and values by pressing the function keys
located below the TFT screen. For details, please
refer to “How to Use the Menu Mode.”
When you have completed the changes to the Menu
item(s), press and hold in the [
MNU
] key for 2 sec-
onds; the setting(s) will now be saved. If you do not
want to save the new setting, press the [
MNU
] key
momentarily; the radio will revert to its previous con-
dition.
There are 161 items in the Menu mode, and they are
grouped; the group name is displayed at the left top
of the list screen. It will be convenient for you if you
initially select the group, by rotating the Main Tuning
knob, and
then select the item you want.
The groups are as follows.
1.
AGC :
2. DISPLAY :
3. FH-2 :
4. GENERAL :
5. MODE-AM , MODE-CW , MODE-DATA , MODE-
DM , MODE-PKT , MODE-RTTY , MODE-SSB
6. RX AUDIO :
7. RX DSP : RX Filter bandwidth and shaping
8. SCOPE : Setup of the starting frequency for the
Spectrum Scope
9. TUNING : Setup of the Dial steps
10. TX AUDIO : Setup of the Parametric Equalizer
11. TX GNRL :Setup of the
For detailed information regarding the Menu mode,
please see the “How to Use the Menu Mode” section
of this manual, and the operation manual of the ra-
dio.
M
ENU
M
ODE
R
ESET
It is possible to reset (only) the Menu mode set-
tings back to their factory default. Do this if you
want to clear all settings out, and start fresh with
the original values.
1. Turn off the radio.
2. Turn the radio on while pressing and holding
in the [ MNU
] key.
Page 3