Yaesu FT-991A, Руководство по эксплуатации

Страница: 120 / 158

Page 118 FT- 991 Operating Manual
Using the GPS Function
Displaying the Position Information
Displaying the Current Station Position Information
When Menu Item “028 GPS/232C SELECT” is set to “GPS1”
1. Press and hold the
MENU(SETUP)
button.
2. Touch [ LAT/LON
] on the LCD.
3. Touch [
GPS
] on the LCD.
MENU(SETUP) Button
The latitude and longitude of this station will be dis-
played.
Entering the Location Information Manually
1. Press and hold the MENU(SETUP) button.
2. Touch [ LAT/LON
] on the LCD.
3. Touch [ LAT
] on the LCD.
5. Touch [ LON
] on the LCD.
6. Enter the longitude, then touch [ ENT
] followed
by [ BACK
].
7. Press the MENU(SETUP) button to exit to nor-
mal operation.
Advice:
The manually registered location information can be
erased by touching and holding [ LAT ] / [ LON ] on
the LCD for one second.
4. Enter the latitude, then touch [ ENT
] followed by
[
BACK
].
When Menu Item “028 GPS/232C SELECT” is set to “GPS2”
1. Press and hold the MENU(SETUP) button.
2. Touch [ LAT/LON ] on the LCD.
The latitude and longitude of this station will be dis-
played in real-time.