Yaesu FT-991A, Руководство по эксплуатации

Страница: 106 / 158

Page 104 FT- 991 Operating Manual
Memory Operation
Standard Memory Operation
The Standard Memory of the FT-991A allows storage and recall of up to 99 memories, each storing frequency, mode,
and a wide variety of status information, detailed previously. Memories may be grouped into as many as six Memory
Groups. Additionally there are nine pairs of band-limit (PMS) memories along with five QMB
(Quick Memory Bank)
memories.
Memory Storage
1. Set VFO-A up with the frequency, mode, and status,
the way you want to have it stored.
2. Press the A

M button momentarily; the current
channel number will appear in the display and the
“ MCK ” notation will appear.
A

M Button MULTI Knob
E J
E J
%9 7
3. Rotate the MULTI knob to select the memory chan-
nel that you wish to store the data on.
4. Press and hold in the A

M button for one second to
store the frequency and other data into the selected
memory channel. A double beep will sound to con-
firm that the operation is completed.
Memory Channel Recall
1. Press the V/M button, if necessary, to enter the
“Memory mode”.
2. Press the F
(M-LIST)
button, then touch [ MCH
] on
the LCD. A memory channel number and the “ MCH ”
notation will appear in the display.
F(M-LIST) Button
V/M Button MULTI Knob
3. Touch [ MCH
] on the LCD, and then rotate the
MULTI knob to select the desired memory channel.
Advice:
To work within a particular Memory Group, press the
F
(M-LIST)
button, then touch [
GRP
] on the LCD.
Rotate the MULTI knob to select the desired Memory
Group, then touch [
MCH
] on the LCD (the “
MCH
”
notation will appear instead of the “ GRP ”); Now the
memory channel may be chosen from within the select-
ed Memory Group.