Yaesu FT-950, Руководство по эксплуатации, Страница: 94 / 132

Page 92 FT-950 O
PERATING
M
ANUAL
M
EMORY
O
PERATION
S
TANDARD
M
EMORY
O
PERATION
The Standard Memory of the FT-950 allows storage and recall of up to 99 memories, each storing frequency, mode, and a
wide variety of status information detailed previously. Memories may be grouped into as many as six Memory Groups, and
additionally you get nine pairs of band-limit (PMS) memories along with five QMB (Quick Memory Bank) memories.
Memory Storage
1. Set the VFO-A up with the frequency, mode, and sta-
tus, the way you want to have it stored.
2. Press the [
A
X X
X X X
M
] button momentarily (the current chan-
nel number will start blinking in the Multi-Panel Win-
dow); the contents of the current memory channel will
be shown on the frequency display field.
3. Rotate the [ CLAR/VFO-B
] knob to select the memory
channel onto which you wish to store the data. If you
have selected a channel on which data is already stored,
that frequency will appear on the display.
4. Press and hold in the [ A
X X X X X
M
] button for one second to
store the frequency and other data into the selected
memory channel. A double beep will confirm that you
have held the [
A
X X X X X
M
] button in long enough.
Memory Channel Recall
1. Press the [ V/M
] button, if necessary, to enter the
“Memory mode”. A memory channel number will ap-
pear in the Multi-Panel Window.
A
DVICE
:
If you cannot enter the “Memory mode”, check the
[
VFO-B
(
RX
)] Indicator/Switch. If it is illuminated
green, press the [ VFO-A
(
RX
)] Indicator/Switch to
make the [ VFO-B
(
RX
)] Indicator/Switch go out, then
press the [ V/M
] button again.
2. Press the [ MCH
] button. The orange LED inside the
button will light up, indicating that you are ready to
recall a memory channel.
3. After pressing the [ MCH
] button, you may rotate the
[
CLAR/VFO-B
] knob to select the desired memory
channel.
A
DVICE
:
To work within a particular Memory Group, press the
[
GRP
] button (the imbedded LED will glow orange), then
rotate the [ CLAR/VFO-B
] knob to select the desired
Memory Group. Now press the [
MCH
] button (the im-
bedded LED will glow orange); you may now choose the
memory channel within the selected Memory Group.
Multi-Display Window
[V/M] Button
[VFO-A(RX)] Button
[VFO-B(RX)] Button
[MCH] Button
[GRP] Button
[CLAR/VFO-B] Knob
[A
X X X X X M] Button
[CLAR/VFO-B] Knob